A.B.L.E is an anti-theft brake locking system that is safe and controlled which can be fitted to one or both the brake and clutch systems of most motor vehicles produced in the world.  The device does not interfere with the braking system or any standard electronics in a vehicle.  A.B.L.E works once it is activated by closing a ball valve which then allows the fluid to flow through the check valve with no return. When the brakes are applied, they safely stop when pressure is applied to the brake pedal and cannot be released until the activator is turned off, which allows the fluid to return to the reservoir.   

The activator, effected by the standard power of motor vehicle is 12 volts takes five seconds of power to open or close the ball valve.  The system works so that if the main battery has been disconnected the backup battery which has been installed reacts immediately. The backup battery stores 380 minutes of power and will be fully charged by the vehicle’s alternator and does not drain power supplies from the main battery of the vehicle.  

The “Ball Valve” mechanism inside the A.B.L.E device it is a long-lasting unit as there are few moving parts to cause wear and tear. The valve can be operated anywhere in the world through an activator receiving a text message with the command of activation or deactivation. The electronic tracking device will send back a message confirming the owner’s command listing whether the valve is on or valve is off.